The good, The better, and the beauty! My test print became my favorite desktop item. This is a print in place design and there are moving interwined parts which comes assembled when printing is done. The tolerance between those parts are important for the design to work flawless, therefore engineering filaments, materials with low tolerance(such as PETG) generally tend to work better. And Materials like silk pla, magic pla( like the one i used for printing) expand a lot, so they generally tend to fuse interwined parts together. BUT NOT FOR THIS DESIGN! i intentionally chose the worst material to see if the design will fail but it did not, works flawless. So you can choose any material to print. The Gcodes i shared are for PLA ( nozzle & build plate heat are set for PLA.) 4 walls, 4 top layers, 4 bottom layers, 15% infill (4x walls/top&bottom layers are necessary for screws to be durable). Saddle up fellas!, if you like the design, you better get printing :)