Design Concept

This model is designed to hold two 5' x 1/2" EMT conduit bars, turning them into a heavy-duty wall-mounted filament rack. With proper installation into wall studs, the rack can safely support up to 23 filament rolls—approximately 23kg total. Ideal for makers who need organized, accessible filament storage without sacrificing wall space.

Print Settings

Printer: Creality K2

Print time: 3 hours

Layer height: 0.2mm

Infill: 15%

Material: PLA

Supports: None

Assembly

The model includes built-in screw holes designed for direct wall installation. Use two wood screws per mount and ensure they are screwed directly into wall studs for maximum strength—DO NOT mount on drywall alone.

Once secured to the wall, slide two 5-foot sections of 1/2" EMT conduit (standard electrical conduit) into the slots to complete the rack.

No printed fasteners or external brackets are required—just screws and conduit. Once mounted, the bars will snap into place and will support filament spools cleanly and securely along the wall.

Filament Rack Wall Mount

0.2mm layer, 2 walls, 15% infill