This is a 3D model of the instrument cluster bezel for the Ford Ranger. It is provided as a complete blank, specifically designed for makers who want to build a custom dash.

Compatible Years:

Ford Ranger: 1998–2011

Mazda B-Series: 1998–2010

(Note: Fits all Gen 3 interiors. For 2004–2011 models, remember that the cluster is tied to the PATS anti-theft system if you are doing a full swap).

Design Concept:

The face of the cluster is solid so you can "cut" your own holes for digital screens (Holley, Haltech, Raspberry Pi) or traditional 52mm/80mm gauges as well as dovetail or slice where you want. It includes all factory mounting points for a secure fit.

Print Settings:

I printed this successfully using PLA+ 2.0

Filament: SUNLU PLA+ 2.0

Nozzle Temp: 220°C

Bed Temp: 60°C

Layer Height: 0.2mm

Outer Wall 0.6mm

Inner Wall 0.6mm

Top Surface 0.6mm

Seam Gap 5%

Walls/Perimeters: 4

Infill: 10% Grid

Supports: Yes, Tree Supports

☀️ Pro-Tip: While PLA+ 2.0 is very strong, if you live in an extremely hot climate (100°F+ summers), consider painting the part with a UV-resistant clear coat or using ASA to prevent any softening during peak summer heat.

2010 Ford Ranger Instrument Panel - BLANK