中文：

1️⃣灵感来自于麦当劳最近新上市的甜筒拍拍灯，由于对细节的把控，建模设计耗时较长，先前已经将完成的甜筒威化筒部分分享给大家，目前已经在约定的时间内，完成甜筒顶部的奶油部分，再次上传分享给各位🫡，感谢各位的关注、收藏和下载打印❤️…

2️⃣ 考虑到精细度和耗时，上传3个版本，依次为【0.4mm喷嘴0.08mm层高】、【0.4mm喷嘴0.16mm层高】、【0.2mm喷嘴0.06mm层高】，各位按需使用…

3️⃣ 下载后可直接打印，或者根据需要进行缩放尺寸… 建模尺寸为真实世界甜筒尺寸，同时拓竹LED夜灯组件可盖在奶油底部，正在设计可嵌入拓竹LED组件模型版本，敬请期待🫡…

4️⃣ 如需一个完整的冰淇淋甜筒模型，可在主页找到对应模型进行下载，奶油与甜筒底部的两个模型，默认尺寸支持拼接使用，直接打印即可…

甜筒底部模型链接：麦当劳甜筒冰淇淋 - 甜筒底部（McDonald's Ice Cream Cone -bottom）

-----------------------------------------------------------------------

English：

1️⃣The inspiration comes from McDonald's recently launched cone lamp. Due to the control of details, the modeling and design took a long time. I have previously shared the completed cone wafer part with you. Now, within the agreed time, the cream part on the top of the cone has been completed. I will upload it again to share with you 🫡. Thank you for your attention, collection and download and print ❤️…

2️⃣ Considering the precision and time consumption, 3 versions are uploaded, namely [0.4mm nozzle 0.08mm layer height], [0.4mm nozzle 0.16mm layer height], [0.2mm nozzle 0.06mm layer height], and you can use it as needed…

3️⃣ After downloading, you can print directly, or scale the size as needed… The modeling size is the size of a real-world cone. At the same time, the Tuozhu LED night light component can be covered on the top of the cylinder. A model version that can be embedded with the Tuozhu LED component is being designed. Stay tuned🫡…

4️⃣ If you need a complete ice cream cone model, you can find the corresponding model on the homepage for download. The two models of the cream and the bottom of the cone have default sizes that support splicing and can be printed directly...

Cone bottom model link: 麦当劳甜筒冰淇淋 - 甜筒底部（McDonald's Ice Cream Cone -bottom）

McDonald's Ice Cream Cone - Cream