Here is our new Flexi design - Chipmunk.

We've made it in a cartoon style, just like our little fox cub.

The Chipmunk is available in two versions - print in place (with a solid head) and with a movable head.

There are 2 versions of the head - Standard and Happy (with an open mouth).

There are STL and pre-painted 3MF files in the ZIP file.

----- Copyrights ------

The toy is for PRIVATE USE ONLY. The files aren't allowed to be resold, shared or given away.

Don't forget to check out our Patreon community to support us or to get our permission to sell 3d prints of the toy.

https://www.patreon.com/happyflexipets

That'd be amazing to see your results in the Makes section or on social pages, tag us using #happyflexipets

By the way, here is our Instagram

https://www.instagram.com/happyflexipets

Our printing recommendations for the model.

Before printing the colored model with the moveable head version, print a test for the pin in one color of the filament that will be the main one (the pin and socket in the neck will be printed from this filament). In the file Pin_test.3mf, we have prepared the neck socket, head, and 4 pins with different sizes ranging from 100% to 103%. The pin should fit well into the socket, and the petals should remain intact.

If even the largest pin from the test moves freely in the socket, print pins in an even larger size.

It is better to avoid using silk filaments – they are quite fragile, and the petals often break when inserting the pin.

Insert the pin with the flat side facing the back.

- - -

You can see our settings below

Material: Bambu Lab Matte PLA Charcoal, Ivory White;

Bambu Lab Basic PLA Beige, Brown

Printer: Bambu P1S

Nozzle: 0.4

Layer height: 0.2 mm

Infill: 5%

Walls: 2

Scale: 100%

Slicer: Bambu Studio

Chipmunk the flexi toy