This is a tool kit organizer based on the standard tools that are received with the K2 Plus. I believe that these slots can fit most nippers and clog removers as well. I added the shelf below to hold additional nozzles and other items that wouldn't fit along the top shelf. This fits along the edge of the top glass where there is a gap so it hangs off the side. This can be pushed to the front part of the machine and placed on either side. Although the right side of the machine will cover the USB port or the external spool holder.

No special print settings, I do recommend printing on its side in a vertical orientation as it helps with strength when hanging from the machine. Here are the settings I used:

Layer Height 2.0

Precise wall

Print Infill First - Not necessary but I find helpful with overhangs (Be sure to have wall printing order "Inner/Outer" selected)

15% Infill Density

Infill Patter - Dealers Choice I like Gyroid

Support Settings

Tree (Auto)

Style Organic

Top Z Distance 0.285 - this may be different for your machine

Skirt loops 2 - i find helpful for purging with single colors (makes sense in my mind :P)

I haven't looked deeply for anything similar, although there may be some out there... but I have found this handy.

Also please dont judge the split color scheme... This was my first test print and I wasnt expecting it to work 100%... lucky me :D

Accessory Holder for K2 Plus

0.2mm layer, 2 walls, 15% infill