中文：

1️⃣ 由于羽毛球拍原本的木把手断裂，制作了这款3D打印的羽毛球拍握把，整个握把适合手比较小的人群，会比常规售卖的羽毛球拍握把细一些，打印后可以通过球拍握把缠绕胶带调整粗细，经过多次使用，强度无问题。

2️⃣ 设置了多层墙进行打印，提高强度，也建议实用PETG或者强度更高的材料进行打印，模型与羽毛球拍连接的部位建议塞入木头或者其他缝隙固定物，用来提高羽毛球拍和手柄之间的牢固程度，并最后用手柄缠绕胶带进行二次固定。

-----------------------------------------------------------------------

English：

1️⃣ Due to the breakage of the original wooden handle of the badminton racket, this 3D-printed badminton racket grip was developed. It is suitable for people with smaller hands, being slightly thinner than regular commercially available badminton racket grips. After printing, the thickness can be adjusted by wrapping grip tape around the handle. Through multiple uses, its strength has been proven reliable.

2️⃣ Multi-layer walls are designed for printing to enhance strength. It is recommended to use PETG or other materials with higher strength for printing. For the connection area between the model and the badminton racket, it is advisable to insert wood or other gap fillers to improve the stability between the racket and the handle. Finally, use grip tape for secondary fixation.

羽毛球拍手柄（Badminton racket handle）