This mounting kit, for the Creality Box 2 Camera, is tailored to the Ender 3 Neo.

It slots over the horizontal hot-end / extruder bar's mounting bracket.

No screws or bolts required.

No tools required.

The basic kit consists of 3 parts that snap-fit together.

My intent with this design was to get a kit that will allow one to mount the cam without having to alter or dismantle parts of the printer.

Basic Kit Parts:

Short Link

Cam Mount

Z-Bar Slot Mount

Assembly:

Fit the short link to the Z-bar slot mount via the snap-fit ball-joint .

Fit the Cam Mount to the other end go the short link.

Slide the camera base plate into the Cam Mount slot

Run the cable trough the cable hook at the back of the Cam Mount and link arms.

Slide the mounting kit over the right hand side plate of the vertical roller assembly for the horizontal bar.

Make sure your USB cable, from the Cam, is connected to your Creality Box 2!

I have added some additional parts which will allow you to trial some alternate configurations at your own leisure.

I hope you enjoy the easy print and assemble Ender 3 Neo mounting kit.

Sliced with Creality Print 5

Printer: Ender 3 Neo

Filaments: PLA

Infill: 15% to 20%

Retraction,

Nozzle Temp: 200

Bed Temp: 60

Support: No

Brim: No

Slow3D

CR Box Cam Mount Kit