Introducing the K1/C Modifications Master Model — a complete, all‑in‑one collection of performance upgrades designed specifically for the Creality K1 and K1C ecosystem. ⚙️

This master bundle brings together a carefully developed set of sub‑models created through real‑world testing, iterative refinement, and hands‑on experience with high‑speed CoreXY printing. Each component is engineered to integrate seamlessly with the K1/C platform, helping users improve reliability, airflow, maintenance access, and overall print consistency.

From thermal management and mechanical stability to protective upgrades and workflow enhancements, this collection serves as a unified toolkit for makers who want to push their machines beyond stock performance.

Think of it as a single hub for transforming your K1/C into a smarter, cleaner, and more capable printing system. 🚀

_____

Creality K1 all modifications:

Quick rundown to print->

1. Cartographer Scanner modification

2. R3MEN Graphite hotbed

3. 270 Degree Hinges

4. DXC Extruder Rear riser fix

5. Rear Z rod dust cover

6. Side fan duct

7. Fan cover and protection

8. Risers

_____

1. Cartographer Scanner Mod

These scans are extremely time-efficient and accurate, leading to better first layers.

Model files for printing: UPGRADED Carto-mount. Why use my mount?

a) MORE PRINTSPACE!!! 220x220x250 original print-space achieved, no cuts!

b) Lightweight mount, faster accelerations

c) STRONG MOUNT!! Strong reinforced mounting solution.

WARNING!!!

To use my mount, use this code during the step: “To run the script, you must use the following command:”

CODE: “/usr/data/pellcorp/installer.sh --install cartographer --mount PurcellV5”

Using my mount, you will need 2x (M3x8mm screw)

I used socket cap head screws.

How to install: https://pellcorp.github.io/creality-wiki/cartographer/#factory-reset

PLEASE FOLLOW THIS GUIDE!!! Note: I started the installation at “Clone the Repo” as I had a completely stock machine, however please do read the above instructions.

2. R3MEN Graphite hotbed

The R3men graphite hotbed provides incredibly accurate first layers, with people achieving <.1 mm meshes. Meshed with my cartographer modification from the first modification, I had a 0.2mm total deviation across the whole bed, and that can be improved furthermore!

This hotbed allows for extremely flat first layers, quick heating, and minimal heat expansion at different temperature variants.

Link to purchase the graphite hotbed for K1/C: https://www.r3men.com/products/graphite-heated-bed-upgrade-kit-for-creality-k1-k1c-k1se?ref=junliang_d

I have made knobs for this modification so you do not lose ANY PRINTSPACE!!! These knobs are designed to be low-profile and accessible. Keep in mind you only need these knobs if you are using spring-mount solution. Do mind that you will need heat set inserts (M4 thread) for these knobs.

Filename: Bed leveling knobs.

Also with this mod, you will need to print an SSR Mount, to securely mount the SSR (Solid State Relay) which is also provided alongside the graphite bed. Link here to download and print the SSR mount: https://www.**********.com/model/1182750-k1-k1c-k1se-ssr-mount-for-bed-heater-upgrade

3. 270 Degree hinges for K1.

These 270 Degree hinges allow the door of the K1 to swing past the default stock, allowing for easier maintenance and work. This modification requires minimal hardware and parts to make. Link here: https://www.**********.com/model/735524-creality-k1-k1-max-door-hinges-geared-print-in-pla

4. DXC Rear fix.

Many users with the DXC Extruder installed have issues where the DXC Extruder hits the rear cables. As a result, I have designed this modification and spacer to effectively lift those components. You would just need a slightly longer screw than the original. A M3x30mm should be plenty. Do mind this spacer is 10mm high.

Spacer name: DXC Extruder-Rear Chain riser.

5. Rear Z rod Dust cover.

This rear dust cover effectively prevents dust from seeping into the Z rod bearings, keeping them clean and operable. This is a simple slip-in modification, requiring no hardware whatsoever.

6. Fan Duct Upgrade:

This duct allows straighter cooling towards the nozzle.

The original fan duct provided was too high, blowing at the nozzle shroud instead of the actual nozzle, so as a result many makers had made this fan duct, for the K1. I have improved it by adding improvements to specifically the inlets and outlets to help the airflow be as good as possible, and saving as much airflow towards the exit as possible rather than wasted airflow.

Keep in mind this modification will need one heat set insert of (M3)

Name of file: Auxiliary Fan duct Improved

Original fan duct model: https://www.**********.com/model/970189-creality-k1-side-fan-improved-flow-duct/files

7. Fan covers

Noticing that the fans on the K1 are overly aggressive, one time even cutting my finger, I made covers to prevent further injuries.

Rear fan (Exhaust fan cover)

Crediting Markus for the amazing textured photo.

8. D3P riser for K1.

Although I had a rough time with assembly, other users report having good results with this riser. Be careful with the assembly steps. D3P Riser: (PAID)

D3P Riser for K1 series

Together, these upgrades form a cohesive ecosystem designed to enhance durability, streamline maintenance, and unlock the full potential of high‑speed printing on the K1/C platform.

Whether you install one improvement or the entire suite, this master model ensures every upgrade works in harmony — delivering smoother operation, improved reliability, and a more refined printing experience.

Upgrade smarter. Print faster. Build with confidence. 💥🖨️

Creality K1/C Modifications KIT

0.2mm layer, 2 walls, 15% infill