Creality K1 cable chain riser 13mm (may fit for the K1Max oder K1C too, i don't know)

-- fixed Version: The left part was too long, collided with the housing, is fixed now--

(sorry to the one guy, who has downlaoded the old version ;-)

This is a remix of a remix in crossover with another model.

The origin is this model from LEOTE3D:

https://www.printables.com/de/model/920992-creality-k1c-k1-front-chain-riser-12mm

The remix is from Jan Kurek:

https://www.printables.com/de/model/992078-creality-k1max-front-chain-riser-12mm-enhanced

With the improvement of the idea from Stanislav Grim:

https://www.printables.com/de/model/868154-spacer-cable-chain-for-k1-k1-max

With the aim of designing a stable, durable riser that does not require removing the cables or destroying the original part (if you do not want to or cannot remove the cables) and, very importantly, with the option of removing the print head cover without first dismantling the attachments. It seems to have worked.

The following are required for assembly:

1x M3 6-8mm countersunk head screw, Allen

1x M3 10mm countersunk head screw, Allen

2x melting thread M3x5x5 (M3x4x5 should work too)

1x washer M3

Install everything as shown in the pictures or in the descriptions of the originals and use the washer under the original chain holder. Dont forget the sanding of the top surface and the top corners.

Print settings:

PETG (ASA, ABS) recommended

0.16 mm or finer layer height

3-4 outer layers

25% or more infill

If you have any questions, please feel free to ask.

Creality K1 Cable Chain riser front 13mm, fixed

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill