A Like, Rating or Comment is a huge help and I really appreciate all of it. 🙏

==========================================================

DnD TTRPG Crocodile Miniature

Hiding just beneath the murky water, the crocodile is a massive, scaled reptile, its low-slung body and patient stillness masking a terrifying burst of speed and power. Its massive jaws, lined with rows of crushing teeth, snap shut with lethal force, dragging unfortunate prey beneath the surface to a watery grave.

Nozzle: 0.4

Layer Height: 0.08mm

**This print has been tested multiple times on an X1C and P2S successfully, results may vary if printed on a different printer (bedslinger or another CoreXY)**

Post Processing: Use thin tweezers to Pull supports down and out after cutting from the brim/base first. Be careful around the claws, as they're thinner. These just need extra care and patience. Some smoothing (sanding etc) after the supports are removed, may be required.

Assembly: This model comes in 2 Parts that need to be glued together. Glue Part A and both Parts of B with glue like Crazy Glue.

After gluing may require some miniature filler prior to painting.

Housekeeping: Make sure your printer is Calibrated, Build Plate washed and Filament Dried so the supports have the best adhesion possible. Let the miniature fully cool down before removing supports.

DnD TTRPG Crocodile Miniature

0.4 nozzle 0.08mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill