Layer Height: 0.20mm. (You don't need ultra-fine layers here. 0.20mm is perfect for planters and prints faster. The slightly thicker layers also bond better, reducing the chance of water leaks).

Infill: 15% - 20% (Gyroid). (A slightly higher infill gives the walls more rigidity when filled with heavy soil and small rocks).

Wall Line Count (Perimeters): 4 to 5 Walls (MANDATORY). (This is the secret to a water-tight planter! Using 4 or 5 walls ensures that water cannot easily seep through the plastic).

Top/Bottom Layers: 5 to 6 Bottom Layers. (Make sure the bottom is thick and solid to prevent leaks).

Supports: No / Optional. (This model is designed to print support-free! The nose and ears have gentle angles. If your printer struggles with overhangs, you can add a tiny tree support just under the tip of the nose).

Print Speed: 50 - 60 mm/s. (You can print this a bit faster than the Funko Pops since it has no tiny details).

Build Plate Adhesion: Skirt or Brim. (A skirt is usually fine since it has a large flat base, but a Brim guarantees it won't warp).

Design Concept

This design leverages the unique and adorable shape of a capybara, turning it into a charming succulent planter. The detailed sculpture ensures it is both a practical item and a decorative piece.

Function

It serves as a planter, suitable for small plants like succulents or cacti, adding a touch of whimsy to any space including living rooms, offices, or study desks.

Printing Advice

For optimal results, print using a high-resolution setting to capture the fine details of the capybara's texture. Use a strong PLA or ABS material to ensure durability, especially if used outdoors.

Assembly Instructions

The planter is a single piece and does not require any assembly. Make sure it is printed with appropriate drainage holes if used for live plants.

Cute Capybara Succulent Planter Pot