Doll Mask by Perihelion Prints

======

Based off a paper mask design. Wearable or ready for display.

Scaled to fit most adult heads. You may want to do a test print to confirm fit, and scale accordingly.

For attachment to your head, use cord or ribbon. You can measure enough to go around your head, then make two strips of that length and attach them to the sides of the mask. Hot glue works well. Then you can position the mask over your face, pull the cord or ribbons back, and make a knot behind your head. Or you can edit the file to come up with your own solution.

Designed in Blender. STL included. Dimensions in millimetres.

======

"CBTUP409QH2DAVG5Z8RFOUUYB" used in demo render (https://skfb.ly/pxFuJ) by VITU6018 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

======

0.20mm layer height recommended.

Organic supports recommended. You may need to adjust the orientation of the mask to fit it on your printer's bed, but try to print it as upright as possible for best results.

PLA/PETG recommended.

Filament Usage (estimated): 285g

Printing Time (estimated): 21h15m

^ Estimates based off slicing the regular variant for a Prusa MK3.9. Your mileage may vary.