3d Printed Druid artwork, Please follow the print instruction precisely (you can switch the colours up if you like) and you wil have the same results as me.

Do not worry too much about transmission distances, this refers to how much light shines through x number of layers through y colour and brand of filament. I have left the information there for the Hueforge nerds. you can play fast and loose with the colours, so long as you don't mess too much with the other parameters you should get some great results.

The creation proccess involves taking created artwork into a lithography program, studying the transmission distances of various filaments to 'mix' colours and shades.

do not attempt to resize or thicken the design unless you know what you are doing, colour mixes are layer sensitive.

I'd love to see your prints.
Print instructions are as follows.

Project: druid.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm

Filaments Used:
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#4c2810 PLA+ Numakers Chocolate Brown Transmission Distance: 0.3
#755c48 PLA+ Numakers Beige Brown Transmission Distance: 1.3
#565d65 PLA+ Sunlu Grey Transmission Distance: 2
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Chocolate Brown
At layer #11 (0.96mm) swap to Beige Brown
At layer #17 (1.44mm) swap to Grey for the rest.

Druid 3d Art, file and guide