A majestic HueForge-style bas-relief that captures all the power and elegance of an eagle in flight.
This HueForge-style bas-relief was created using only two colors (white and black).

🔹 Colors

White: use a non-opaque white PLA (tested with Sunlu PLA). A slightly translucent filament will produce better shading results.
Black: no special requirements. Any black PLA is suitable.

0.00 – 0.60 mm → Black – layer height 0.20 mm
0.60 – 0.68 mm → Black – layer height 0.08 mm
0.68 – 1.88 mm → White – layer height 0.08 mm ➡ Set the color change to White or Pause at layer 5 (0.76 mm) in preview

Set:

Infill = 100%
First layer height = 0.20mm

🔹 Model Dimensions

180 × 130 mm – approx. 30 g

🔹 Printing Notes

Printability: the model can be easily printed on any 3D printer with a 0.4 mm nozzle, without supports and without special precautions.
Do not simplify the model: reducing the level of detail may lead to unpredictable results.
Slicer processing time: a few minutes, due to the high level of detail.
The “floating regions” warning can be ignored.
The model can be scaled in X and Y, but not in Z. It can also be split into multiple parts to create a larger bas-relief beyond the print bed size.

Click on this link to Support for HueForge panels:

https://www.crealitycloud.com/it/model-detail/hueforge-panels-frames-plates-support?source=22

Boost Me

Click “Follow” so you don’t miss the next models. If you found it useful, share your makes and leave a LIKE or a boost.

Boost

Eagle in flight - HueForge