Super cool pet house for your cat, rabbit, or dog. You need at least 250 x 250 x 250 mm of space to build it. Otherwise, you can make it a little smaller, and this cool eye-catcher will still be very large! All parts have connectors and are easy to assemble. A PDF file contains numerous pictures showing how everything is put together. It is built from the bottom up in sections. The file names help you sort the parts and also contain the required quantities. Support material is only required on the print bed, as the grooves here provide stability during printing and the surfaces in the grooves become cleaner. The entire model is assembled and fixed in the grooves with superglue, as are the feet, which also have pins for fixing and holding. These are simply inserted into the feet from above through the housing.

Please note that printing some parts requires a very well-calibrated printer and is only suitable for advanced users. Once you have printed all the parts, lay them out in front of you and start putting the individual segments together. Do not use any glue yet! This should only be used when the parts can be put in place, i.e. at the last moment. It is also a good idea to put everything together once. The connectors only fit into the designated places on the parts.

Once the last segment, which is at the very top and also includes the handle and the pin, is in place, the connectors are inserted at an angle. Then it is easy to insert everything into the lower part of the hand grenade. Again, only use the superglue carefully at the last moment!

If you like this animal house, leave me a “LIKE”!

I recommend the following printer settings:
- PLA or PLA+
- Two or preferably three colors of your choice
- Min. 2 walls
- 10% infill

huge Explosive cat / pet house for your beloved animal