I hope aviation enthusiasts will enjoy this model, which is one of the most popular aerobatic plane models.

The part joint tolerance is designed to be a tight fit. If you have trouble fitting the parts together, it may be necessary to lightly sand the edges using a nail file.

After printing, fix the parts with some super glue, and then you can paint the model as you wish with acrylic paint using a brush.

If you want to paint this model to look like a die-cast model, you can watch the video I prepared using the link below.

https://youtu.be/rm57s3rcLjo

Overall Dimensions: 33cm x 38cm x 13cm (13.1” x 15.0” x 5.3”)

Note: This is a display model. It cannot fly

Suggested Slicing Parameters

- Nozzle :0.4 mm

- Layer Height : 0.10 mm (Group-1)

- Layer Height : 0.20 mm (Group-2)

- Infill : 7.5% Grid

- Retract on Layer Change: ON

- Support : Only for propeller

Group-1

• Main Wheels

• Wheel Fairings

• Landing Gear Struts

• Tail Wheel

• Propeller

• Propeller Shaft

• Canopy

Group-2

• Horizontal Tails

• Front Fuselage

• Back Fuselage

• Wing Left

• Wing Right

• Fuselage Connection Pin

Extra EA-300 Scale Model 1:20