K1C riser with a flip-up front lid and tool storage drawers.

Design concept

designed to support CFS unit or other multi color system and dryer. Fits neatly on top of the K1C and bolts in the original holes . The flip-up lid gives you easy access to the extruder if needed and the side louvers let you control air flow and inside temperature.

Print settings

can be printed in any material of your choice but i did mine in PETG, if i re-print one i would use Hyper-PETG or any fast PETG as i find the dimensional result is better than with generic PETG. (had to smooth corners of assembled parts for better fitment w/petg but no sanding was needed when done w/ hyper petg).

- 3 walls w/20% infil in adaptive cubic / allow thin wall detection

- grid supports for some of the parts

- no brim needed

Updates

2026/01/20 all part except the 4 base part were modified to ease of printing on the K1C... some were to close to limit and had to be printed at angle

2026/01/23 r/s and l/s interior louver panel files replace as there was an extrusion error in the design.

flip-up lid K1C riser