This is a custom-designed mount and protective case for the Garmin Dash Cam 35. It provides a snug fit for the device while offering side and rear shielding for added protection. Ideal for discreet installs or hardwired setups, the case can be mounted in a variety of orientations depending on your vehicle.

Use Case: I needed a boxier, flat mount with more surface area for adhesive than the original mount which I lost long ago anyways. The Dash Cam 35 fits snugly with friction, but you may want to use a small strip of double sided tape to secure it to the bottom. I don't often need to grab the SD card, so this isn't much of a problem for me, but if it is for you and you can think of an elegant solution please let me know.

🔹 Features:

Tailored to fit the Garmin Dash Cam 35 securely

Open front face for full camera view and ventilation

Rear notch allows access to power cable and buttons

Side walls protect against glare and accidental bumps

Power indicator light cut out

🖨️ Print Recommendations:

Layer height: 0.2mm

Material: PETG or ABS recommended for heat resistance

Infill: 20–30%

Orientation: As uploaded, use a nice patterned build plate

Supports: None

Garmin Dash Cam 35 Blackbox Mount & Case [Improved Model]

0.2mm layer, 2 walls, 15% infill