3D Model Description

This is a 3D-printed model of a stylized bust of Groot, the beloved character from Marvel's Guardians of the Galaxy. The bust features a detailed, melancholic facial expression and a textured, wood-like surface. It is mounted on a functional, red rectangular base that appears to be a money box or coin bank, with an access slot on the side. The combination of the detailed character model with the clean, geometric base makes for a unique and practical decorative item.

3D Printing Details

Here are some suggested print settings and details for creating this model:

Printer: FDM (Fused Deposition Modeling)

Filament Material: PLA (Polylactic Acid) is recommended for its ease of use, dimensional stability, and wide range of available colors. ABS (Acrylonitrile Butadiene Styrene) could also be used for increased durability.

Nozzle Size: 0.4 mm

Layer Height: 0.2 mm for a good balance of detail and print time. For higher quality and finer details on the face and wood texture, a layer height of 0.12 mm could be used.

Infill: 15-20% for the main body and base. This provides sufficient structural integrity without excessive material usage.

Supports: The model may require supports, particularly for the chin and any overhangs on the textured "hair" and "shoulder" areas.

Raft/Brim: A brim is recommended to ensure good bed adhesion for the base, which has a large footprint.

Print Orientation: The model should be printed upright, as shown in the image, to minimize the need for supports and maintain the integrity of the facial details.

Total Print Time: This will vary depending on the chosen settings, infill, and the specific printer. It could range from 8 to 15 hours.

✨ If you decide to download and print this model, I’d love to see your results! Please share a photo of your print and let me know any feedback or ideas for improvements – it really helps me make better designs for the community. 🙌

Groot Guardian Money Box

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill