Hello everyone :)

I have created different versions of "GRID-ART" to match the upcoming Halloween. The stand can be used for all 3 designs. I hope you like the design.

Both the stand and the Halloween string art are very easy to print and use very little filament.

★ 3 different Designs:
- GHOST
- PUMPKIN
- PUMKIN FACE

★ The principle behind it:
- The printer pulls threads from one side to the other (so-called bridges)
- With each additional layer, the construction becomes a little more stable, this is because the individual threads support each other
- If you now lay the threads cleverly on top of each other, the result is an image

★ RECOMMEND PRINT-SETTINGS:
- Slicer Software: Creality Slicer or Orca Slicer (both tested)
- Printer: K1 Max (Printing was tested with K1 Max & K1)
- Filament: JAYO PLA Matte Black
- Infill: 15% Gyroid or Grid
- Layer Height: 0.16mm
- Walls: 2
- Nozzle Size: 0.4mm
- Support Structure: None needed, ensuring a hassle-free printing process.

Follow us on CrealityCloud and Patreon for more elegant and functional designs.


Support us on Patreon to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere:

https://www.patreon.com/sektor7_studios

Greetings

Leon from Sektor 7 Studios

HALLOWEEN STRING-ART / 3 DIFFERENT DESIGNS

0.2mm layer, 2 walls, 15% infill