Follow us on Instagram (sektor7_studios_3d)

Hello everyone :)

We have modeled very beautiful and timeless TEA LIGHT. The special thing about it is that you can remove the heart inside. If the heart is not placed in the centre, both tea lights can be taken apart. If you place it in the centre, both parts are inseparable. Symbolically practical for your partners.

The fuzzy skin creates a certain concrete look.

Also very suitable as a small Valentine's Day gift :)

CLICK ME FOR OUR VALENTINES COLLECTION

★ RECOMMEND PRINT-SETTINGS:
⭒ Slicer Software: Creality Slicer, Orca Slicer, Creality Print
⭒ Printer: K1 Max (Printing was tested with K1 Max & K1)
⭒ Print example: see "Makes"
⭒ Filament: Overture Matte PLA red & grey
⭒ Infill: 15% Gyroid or Grid
⭒ Layer Height: 0.2mm
⭒ Walls: 2
⭒ Nozzle Size: 0.4mm
⭒ Support Structure: None needed, ensuring a hassle-free printing process.
⭒ Brim: None needed, but when you have adhesion problems than activate the brim

⭒ Other: Activate Fuzzy Skin for the holders (thickness: 0,1mm / point distance: 5mm)

For the Tea Lights you can use your own or this one:

https://amzn.to/4jot6Gl

Greetings

Leon from Sektor 7 Studios

HEART SEPERATED TEA LIGHT / VALENTINES TEA LIGHT

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill