I present to you an interactive map of the solar system.

It is presented in 3 versions and each version in 3 languages (Russian, Chinese, English)

Carefully read what the difference is!

V1 The option (shown in the photo) is one of the most difficult to print. Due to the fact that the panel uses the entire area of the K2 table, the tower of the print and pressure equalization is disabled, as a result of which printing failures and blockages are possible, however, it is possible to patch as with 8 colors in my example, if you have 2 cfs or 4 colors if you have 1 cfs. There are options in 3 languages.

The advantages include a neat appearance and print in place.

V2 Option with a cutout for the cleaning tower and reinforced edges (in the first version, disks of large radii can bend and fall out of the grooves). The advantages include printing immediately, the problem with equalizing the pressure in the nozzle has been solved, and the edges on large radii have been reinforced. There are options in 3 languages in 8- and 4-color versions.

The advantages of print in place the immediate resolution of the problem with pressure and blockages in the nozzle.

V3 Option 3 is the easiest to print, but you will need tweezers and glue (preferably cyanoacrylate). This option also has a cutout for the cleaning tower. First, print the base, and then the planets one by one. When everything is ready, just glue the sun and planets to the base.

The advantages are simple printing, many colors of planets with 1 cfs.

A little about the history of creation - as a child I really liked to leaf through the atlas of the earth, at the end of which there were several pages devoted to space. Therefore, the idea of creation arose immediately. By the way, then Pluto was still a planet, now in my version it is missing. Pluto ceased to be considered a planet in 2006 by the decision of the International Astronomical Union (sorry for this baby). The map is easy to use both on a desk or table, and in the version with a wall mount.

I took the data on the period of revolution and distance from Wikipedia, far from the best source of information, but I hope that in these matters they are accurate and take information from reference books. But if you notice an error - let me know.

If you liked the model, but there is no option with your language - write, maybe there will be time and I will adapt the model to your language.

Materials I used:

Black - Creality hyper pla Black (or any black)

White - Creality hyper pla White (or any white)

Red - Creality hyper pla Red (or any red)

Green Creality hyper pla Green (or any green)

Gold - Creality Silk Red-Gold

Gray - Anycubik PLA Basic Gray (or any gray)

Beige - StarPlast PLA Beige (or any beige)

Transparent blue with glitter - KINGROON PLA Shining Blue

Print options: CrealityPrint

Printer: K2 Plus

Material: PLA

Filling: 15%

Layer height: 0.2mm

Retract: depending on your material

Temperature: depending on your material (PLA 200-230 degrees)

Support: not required

Border: not required

Enjoy your use and happy printing!

Interactive map of the solar system 3 lang (RUS, CHN, ENG)

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill