Design Concept

This Kitchen Cabinet Tablet Holder is designed to conveniently hold a tablet under the kitchen cabinet, saving valuable counter space while keeping recipes easily accessible.

Purpose

The holder provides a safe and sturdy place to hold your tablet while following recipes or watching videos hands-free in the kitchen.

Printing Recommendations

For optimal strength, print this holder using PLA or ABS with 20% infill. The model may benefit from supports during printing to ensure stability.

Assembly Instructions

Simply clip the holder under any standard kitchen cabinet. No additional tools or assembly required.

Print Settings & Manufacturing Instructions

To ensure a strong and reliable Kitchen Cabinet Tablet Holder, follow these recommended print settings:

🖨 Recommended Print Settings

Layer Height: 0.2mm (or finer for a smoother finish)

Infill: 25-35% (higher infill for extra durability)

Perimeters/Walls: 3-4 (to support heavier tablets)

Supports: Not required (designed for support-free printing)

Build Plate Adhesion: Brim or Skirt (optional, based on adhesion needs)

🔧 Recommended Filaments

PLA – Easy to print and strong enough for standard use

PETG – More durable and heat-resistant, ideal for warmer kitchen environments

ABS – Strong but requires an enclosure to prevent warping

🖨 Printing Tips

Ensure a level print bed for optimal first-layer adhesion.

Print orientation is optimized for maximum strength and stability.

If using PLA, avoid placing the holder near heat sources like stovetops.

🛠 Assembly & Installation

No assembly needed! The model prints in one piece for easy setup.

Simply slide the holder onto a kitchen cabinet door or shelf.

Place your tablet in the slot and adjust as needed.

🔹 Notes

Designed to fit most standard kitchen cabinets – check dimensions before printing.

If you need a custom size, you can easily scale the model in your slicer.

Works with most tablets, including iPads, Samsung Galaxy Tabs, and more.