Low-Poly Face Mask by Perihelion Prints

======

Can be worn on its own, or as a cover for a disposable face mask. Should be obvious, but this is only a fashion/costume accessory, and does not offer any medical/particulate protection.

Comes with a quad/rectangular variant and a triangulated variant. Each variant includes a version with holes for the straps of a disposable face mask.

Designed in Blender. STLs included. Dimensions in millimetres.

======

Scaled to fit most adult heads, but you may want to do a test print to confirm fit, and scale accordingly. You may also want to put a piece of form on the nose section, or it might pinch your nose a bit.

For attachment to your head, there are many options. If wearing on top of a disposable face mask, use its ear straps (print the variant that comes with slots at the side for the straps to fit through). Alternatively, you can hot glue some ear or head straps on the sides as shown in the pictures.

======

0.20mm layer height recommended.

Organic supports recommended.

PLA/PETG recommended.

Filament Usage (estimated): 55g

Printing Time (estimated): 3h30mm

^ Estimates based off slicing for Prusa MK3.9. Your mileage may vary.