This is a 3D model of a minifig-style character with X-ray view, made for Hueforge.

A fun and original design – great for display or gift.

Easy to print and perfect for Hueforge and toy fans.

You can find my other models of the same type on my profile.

If you are printing on the printer 4 Colors, you will need to print the version with the built-in pause and manually change the blue filament to yellow at that point in the AMS and then you can resume printing.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 133.33x200mm in size

The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Yellow Transmission Distance: 6

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue

At layer #12 (1.04mm) swap to Red

At layer #18 (1.52mm) swap to Yellow

At layer #23 (1.92mm) swap to Jade White for the rest.

https://www.youtube.com/shorts/N0bUSTe6H_8

MiniFig Lego X-Ray - Hueforge

5 Colors Direct - Hueforge Profil