Design Concept:

This modular magnetic toy set for animals is designed to allow young children to safely explore shapes and colours while developing their creativity. The animals are made up of simple geometric parts with hidden magnets, allowing children to mix and match heads, bodies, and legs to create fun combinations.

Print Settings:

Layer height: 0.2mm

Walls: 2 walls

Infill: 15%

Supports: Normal (auto)

Colors: 6 colours and CFS is required to match the exact colour I used

Material: Hyper PLA

Assembly Instructions:

- No glue required

- When cutting the model, pauses must be built in so that the magnets can be built into the print. For this purpose, there are holes in the model that do not have any support to leave space for the magnets. Insert a pause just before the lid is printed on these holes, insert the magnet and continue printing.

- It is best to look at the picture of the printing instructions.

- Place 6mm x 2,5mm big neodym magnets in the holes. The following link leads to a website selling those.

https://www.maqna.de/neodym-scheibenmagnete/scheibenmagnete-1mm-9mm/neodym-scheibenmagnet-6x2-5mm-vernickelt-grade-n35h-bis-120-c

Modular Magnetic Animal Toys

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill