PivotBin Pro:

The PivotBin Pro is a print-in-place, dual-degree-of-freedom waste management system designed for electronics and workshop use. It provides a compact, mechanically articulated solution for collecting solder trimmings, wire snips, and small debris directly at the workbench.

The design features a 360-degree rotating base for full directional alignment, combined with a pivoting arm that locks into two defined height positions. This allows the waste bin to be positioned higher during active soldering and lowered when not in use, keeping the workspace clear while maintaining fast access.

This model uses a dual-axis mechanical layout, separating rotational alignment and vertical positioning into independent motions. The rotating base enables continuous orientation adjustment, while the pivoting arm provides indexed height control using the Antifall pin. A removable mini wastebasket integrates into the arm, allowing collected debris to be quickly detached and emptied without disturbing the mounted mechanism.

The main base features a print in place moving object; however, the arm needs to be attached post print with the 3d printed axel. The Antifall pin is there for when the trash can is in use, and it makes it sit higher up. The design emphasizes functional motion, modular interaction, and print-in-place engineering, showcasing practical mechanical design tailored to real workshop workflows.

This model demonstrates mechanical intent, multi-axis movement, and task-specific functionality.

This model is typically mounted under the desk so that the trash can is able to rotate out of sight for a cleaner workstation.

Key Design Highlights:

Dual-degree-of-freedom motion (rotating base + pivoting arm)

Indexed arm positions (high and low)

Removable mini wastebasket for quick emptying

Print-in-place mechanical components

Designed for soldering and electronics workstations

Printing Recommendations

Print the axel face up and the Antifall pin as on file. Print the base as on file, and print the arm as shown with regular supports:

PLA+ or PETG recommended

PivotBin Pro – Dual-Axis Mini Solder Waste Holder

0.2mm layer, 2 walls, 15% infill