Charmeleon

Charmeleon is a Fire-type Pokémon that evolves from Charmander. It has a tough and aggressive nature, especially in battle. Its tail flame burns hotter as its emotions grow stronger.

Print Difficulty: Medium

It's a complete multipart design, allowing you to achieve multicolor printing even with just a single extruder printer. 💪

🧾 Inside the file, you'll find:

✅ The complete model

✅ The multipart model

✅ Essential support information

✅ All files are labeled by color.

✅ All pieces are set in the correct print orientation.

🖨️ If you require additional printer settings, here they are:

📏 Layer lines: 0.2 mm

In my videos/photos, I typically print at a layer height of 0.1 - 0.2.

For intricate parts and accessories, I use a 0.1 layer height.

For the shells and the middle part, I opt for a 0.2 layer height.

⭕ Walls: 3 walls

✳️ Infill: 5-10%

🚄 Speed: 45 mm/s

🌡️ Temperature: 200-220°C nozzle and 60°C bed

🛠️ Support: Information for each part is included in the filename.

🌌 Raft/Brim: If you're working with very small parts without support, I recommend using adhesive when your adhesion isn't that strong.

Feel free to share your prints on our Facebook group and showcase your unique creations and variations. 🤩

Happy printing!

For more models or a commercial license, please visit my Patreon page.

https://patreon.com/Pokeballempire

https://www.buymeacoffee.com/pokeballempire

Pokeball 5 Charmeleon