Goomba

Goombas are small, mushroom-like enemies commonly seen in the Mario video game series. They are known for their simple design, with large eyes, thick eyebrows, and sharp teeth. Goombas often march in straight lines and are easily defeated by jumping on them.

Print Difficulty: Medium

It's a complete multipart design, allowing you to achieve multicolor printing even with just a single extruder printer. 💪

🧾 Inside the file, you'll find:

✅ The complete model

✅ The multipart model

✅ Essential support information

✅ All files are labeled by color.

✅ All pieces are set in the correct print orientation.

🖨️ If you require additional printer settings, here they are:

📏 Layer lines: 0.2 mm

In my videos/photos, I typically print at a layer height of 0.1 - 0.2.

For intricate parts and accessories, I use a 0.1 layer height.

For the shells and the middle part, I opt for a 0.2 layer height.

⭕ Walls: 3 walls

✳️ Infill: 5-10%

🚄 Speed: 45 mm/s

🌡️ Temperature: 200-220°C nozzle and 60°C bed

🛠️ Support: Information for each part is included in the filename.

🌌 Raft/Brim: If you're working with very small parts without support, I recommend using adhesive when your adhesion isn't that strong.

Feel free to share your prints on our Facebook group and showcase your unique creations and variations. 🤩

Happy printing!

For more models or a commercial license, please visit my Patreon page.

https://patreon.com/Pokeballempire

https://www.buymeacoffee.com/pokeballempire

Pokeball Goomba