Check out the V2 version!

https://m.crealitycloud.com/model-detail/rotating-petf-clip-v2-k1c-k1-max-k1-k1-se?source=22&objId=

(More lightweight and sticks to the back of the printer better)

Design Concept

This model features a hexagonal base with a rotating PTFE guide meant for K1/K1c/K1 max applications. The design focuses on efficient movement and integration with minimal assembly, making it ideal for 3D printing enthusiasts who seek simplified assembly processes. This allows users to point their PTFE tube in any direction.

Applications

Intended for use in K1 series 3D printers, specifically aiding in improved filament guidance and minimizing friction during printing, while keeping the PTEF tube neat and organized.

Printing Recommendations

Print using a well-calibrated high-resolution FDM printer. Using PLA, PETG, ABS, etc., or other materials can maximize performance. Supports are not necessary for this model. Also print with an infill of around 10-20% to ensure the clip stays together. Print in this orientation:



Assembly Instructions

Designed as a "print-in-place" component, it shouldn’t require any post-print assembly. Ensure the component spins smoothly after printing, then place 1 or more in the hexagonal parts of the back panel of the K1, K1C, or K1 max. Next slide the PTEF tube through the hole and point in your desired direction.

UPDATE 1: Scaled up just a little bit so that it fits in the back of the printer more snuggly. I also made the clip more durable.

Print in Place Rotating PTEF Guide for K1/K1c/K1 max

0.2mm layer, 2 walls, 15% infill