Printing Suggestions:

Print with PLA, PETG or ABS material using a medium level of infill to ensure durability, especially for the intricate head and weapon details. You Can Swap the parts for color printing. All parts are applied with setting, just swap or place parts in different plate for printing ( keep setting same as individual given).

Note: 1) All parts are press fit & required large force. Parts should be joined under adult supervision. (Not by kids).

2) All settings are applied to specific parts. please use specific part setting for separate part printing.

Material Used:- 1) PLA Tiger Orange

2) PLA Grey

Print Setting for Plates:-

A) Plate-01: Includes Mid, Mid-01, Mid-02, Heads, Arm Cap R-L.

1) Creality Print Software

2) Layer Height: 0.16mm (Grid Pattern).

3) Infill : 5%

4) Support: Tree (Organic) Build Plate only.

5) Brim: Outer Brim only (5mm).

B) Plate-02: Includes Nails R-L, Neck, Foot R-L, Tail Parts.

1) Creality Print Software

2) Layer Height: 0.2mm (Grid Pattern).

3) Infill : 5%

4) Support: Tree (Organic) Build Plate only.

5) Brim: Outer Brim only (5mm).

C) Plate-03: Includes Ankle Leg Pin R-L, Arm Pivot R-L, Arm Pin R-L, Mid-03.

1) Creality Print Software

2) Layer Height: 0.16mm (Grid Pattern).

3) Wall loops: 3

4) Infill : 45%

5) Support: Tree (Organic) Build Plate only.

6) Brim: Outer Brim only (5mm).

D) Plate-04: Includes Thigh-01 R-L, Thigh-02 R-L, Hand set-0, Hand set-02, Hand set-03, Forearm R-L, Arm-02 R-L, Arm-01 R-L, Ankle Leg-02 R-L.

1) Creality Print Software

2) Layer Height: 0.16mm (Grid Pattern).

3) Wall loops: 3

4) Infill : 5%

5) Support: Tree (Organic) Build Plate only.

6) Brim: Outer Brim only (5mm).

E) Plate-05: Includes Elbow R-L, Knee R-L.

1) Creality Print Software

2) Layer Height: 0.12mm (Grid Pattern).

3) Wall loops: 3

4) Infill : 25%

5) Support: Tree (Organic) Build Plate only.

6) Brim: Outer Brim only (5mm).

F) Plate-06: Includes Weapon.

1) Creality Print Software

2) Layer Height: 0.2mm (Grid Pattern).

3) Wall loops: 3

4) Infill : 5%

5) Support: Tree (Organic) Build Plate only.

6) Brim: Auto.

Note: 1) Carefully remove the supports.

2) Use filer or sand paper if required for deburring & holes.

Hope You like it..!! Thanks for visit & your support..!! Please Support, Share & follow for more interesting designs..!!

The Pumpkin-Action Figure Toy

Plate-01

Plate-02

Plate-03