This product includes the following items.

[FDM version]

- Architrave.stl

- Column (Base and Shaft).stl

- Column (Capital).stl

- Crepidoma (4 columns).stl

- Entrance Door.stl

- Freize and Cornice.stl

- Roof.stl

- Wall.stl

- X-Clamp (7mm 1.1T).stl

- Roman Doric Style Monument Assembly instructions.pdf

[Resin version]

- [Resin] Roman Doric Style Monument.stl

- [Resin] Roman Doric Style Monument (hollowed).stl

- [Resin] [pre-supported] Roman Doric Style Monument (hollowed).stl

This architectural model was inspired by the design of the great architect Giacomo Barozzi da Vignola.

And we tried to preserve the architectural beauty of ancient Greece and Rome as much as possible by referring to his book 'The Five Orders of Architecture'.

This Monument is optimized for printing with an FDM printer, and it is recommended to print it out in the state provided.

although the structure of the monument is simple, it is designed so that you can feel the real architectural beauty.

This 3D model can also be printed with a resin printer.

For the resin version, the height is 50mm and can be freely scaled for printing.

The pre-supported version we provide may have different results for each printer.

so we recommend only using it as a reference during support work.

Please look forward to the future products of BLUE SAND! Thank you : )

[Note]

- The bust can also be printed with an FDM printer.

(Nozzle : 0.4mm / Layer Height : 0.2mm)

- Test printers : Anycubic Photon D2

- Test resin : Anycubic standard gray