If you want to subscribe or obtain a commercial license, visit my Patreon!

Check out the link for more information:

https://www.patreon.com/PrintyPlay

Today, I’m excited to introduce my new model – a saber-toothed tiger skeleton! I’ve absolutely loved working on this design, from sketching it out to modeling and finally printing it. I hope you’ll enjoy it as much as I have.

The model prints in parts and is super easy to assemble. Please note that for the head, you'll need a little bit of glue. I've tested the model at 80% of its original size, and it worked perfectly.

Included in the attached files are both the STL and 3MF formats for printing the full model. Additionally, there’s a zip file with all the individual parts, plus an alternate head with eyes, as the default full model STL comes without eyes.

If you have any questions or feedback, feel free to send me a message – I’ll be happy to assist. Have a wonderful day!

We want to make sure you have the best possible experience with your 3D printer. While we are here to help, it is important to keep in mind that each user is responsible for the setup of their printer. We are always happy to provide assistance, but please note that we cannot be responsible for any errors in the setup that may affect print quality. We are excited to see your creations and are available to answer any questions you may have during the process!

3D PRINTING SETTINGS

I recommend printing with a minimum layer height of 0.2

With a minimum infill of 10%.

Saber-toothedtigerskeleton