Spiky Punk Mask by Perihelion Prints

======

Can be worn by itself or as a cover for a disposable face mask. Suitable as a standalone accessory or to add flair to a masked cosplay/rave outfit.

Scaled to fit most adult heads, but you may want to do a test print to confirm fit, and scale accordingly. You may also want to put a piece of form on the nose section, or it might pinch your nose a bit.

For attachment to your head, there are many options. If wearing on top of a disposable face mask, use its ear straps and fit them through the slots on the sides (if you've printed a version with slots). Alternatively, you can hot glue some ear or head straps on the sides.

Comes with a version with and without slots in the sides for the straps of a disposable face mask.

Designed in Blender. STL included. Dimensions in millimetres.

======

"Angelica" used in demo render (https://skfb.ly/6ouNX) by DarkNik is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Cristy" used in demo render (https://skfb.ly/pwsBM) by rickcomics is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Face Mask 3D Model (Free)" used in demo render (https://www.artstation.com/artwork/Oowr98) by Aaron Bookout on Artstation.

"Gothic Girl" used in demo render (https://skfb.ly/oPEAI) by Toni García Vilche is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Shang Hai Style Lady in glasses" used in demo render (https://skfb.ly/pxyHX) by aribb is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

======

0.20mm layer height recommended.

Organic supports recommended. You can experiment with other support types if you want to cut down on print time and filament usage, but organic supports will come off the easiest and should lead to the best results.

PLA/PETG recommended.

Filament Usage (estimated): 105g

Printing Time (estimated): 10h30m

^ Estimates based off slicing for Prusa MK3.9. Your mileage may vary.

After printing, if you're really patient and careful, you may be able to paint the spikes a different colour from the mask base. Unfortunately they can't be easily separated for multi-colour printing, but you're welcome to try. Feel free to reach out with any questions prior to or after purchase