PLEASE CHECK OUT MY FULL MODEL COLLECTION FOUND HERE ON CREALITY CLOUD

https://www.crealitycloud.com/collection/3d-model-collection-NwpvCa

You will need supports to print this model and I highly recommend light tree supports as I have had success with them. Fun to paint with and an easy color scheme make finishing this print a real joy. Please post a make if possible. It really "Makes" My day. Remember a Happy Gnome is a Happy Home.

This is very important please note.

This model was created using the Creality Scan Lizard or the Creality Scan Ferret Pro. By itself, without paint, it will not have the definition you see on the photo page. The photo page image is of this model that I printed and painted. That said I have been painting for a very long time. It took me many years to learn to add shading and definition. This can be extremely challenging and even seem overwhelming when you firat start to paint models. Please be patient and practice as much as you can the end product can be very satisfying. Please message me if you have any questions.

Tools you may need

Paint and brushes ( artist fine set should work) You will pluck bristles until the desired width is met so get quite a few.

Painter's mixing board (or some stiff cardboard works great)

Desk Mounted magnifying glass This is a must for fine work.

Desk-mounted part holder (grip style large enough to hold your model for you while you paint). this is HIGHLY recommended

I use a super tacky primer before painting and I use acrylic paints for the most part, but this is up to you(I often use nail polish as well)

Printing Slicer Software Creality Print

Printer Crality K1

Material Hyper PLA

Nozzle .04 @ 215

Bed 55

Layer Height .2

Speed 100mm/ (K1)

Supports Yes

Scan Ferret Pro can be purchased here

https://store.creality.com/products/cr-scan-ferret-pro-3d-scanner?spm=..page_11427365.header_1.1&spm_prev=..login.header_1.1

Scan Lizard can be purchased here

https://store.creality.com/products/cr-scan-lizard-3d-scanner-luxury-combo?spm=..page_11427365.header_1.1&spm_prev=..product_36e9c9c3-f8dd-4029-aa49-8365125570d8.header_1.1

Spring Gnome Welcoming You