All my photos are REAL and show an actual 3D-printed figure photographed by me.

If you're interested in the commercial use of my models, or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. Thank you!

[ Suggested Print Setup ]

Nozzle: 0.4mm (recommended 0.2mm nozzle or Resin Print)

Layer Height: 0.12mm ( You can adjust the layer height based on how much detail you want )

Infill: 30% or more for nice weight

Wall loops: 3

Supports: Tree (auto)

Printed with: Bambu Lab PLA Matte Charcoal - Painted with Metallic Paint

As always!

The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.

Stylized Chess Set

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill