The Flute is a 4-star sword from the Genshin Impact game. This weapon can be obtained through the standard banner or in the Event Bunner.

It's also a good choice for characters like Keqing, Jean, Qiqi, Kaeya, Ayaka and Ayato

The sword around 1100 mm long and all the parts are cut in such a way that they can be printed by an Ender 3 (20x20x30)

It has 8.25mm and 4,20 holes to be able to place 80mm wood or aluminum rods and 4mm aluminium rods as a skeleton.

I usually print my parts with the following definitions ( Because I'm a cosplayer and I prefer to give extra resistance so that the prop resists well to the amount of convention people. You can change the settings if you want. ) :

Quality: 2.8

Walls: 3

Infill: 10% or 15%

Pattern: Zig Zag

- From my own experience, I give a margin of 0.25 mm for the rods (wood or aluminum.), so that the rod can be placed and glued without the risk of them getting stuck inside the piece.

- I provide the full sword not sliced and without holes, in case you want to slice in another way.

- Some parts my need suport, but its small parts that a tree support easily solves.

If you liked the model, please click on like and rate. It is very important for me to know that they like my models. If you have any suggestion or doubt, do not hesitate to ask. :)

You can whenever you need to send me a message here or on my Instagram. @3d.titi

Luck on the Printing and happy cosplay! :D

The Flute - Genshin Impact