The Viridescent Hunt is a 4 Star Bow that can be used by several characters from Genshin Impact as Fischl, Yoimiya, Aloy, Amber and many more.

Tartaglia is seen wielding this bow in his official Character Demo and in Collected Miscellany - "Childe: Foul Legacy" | Genshin Impact.

The Bow is about 760 mm long and It has 8.20mm and 4,20 holes to be able to place 8mm wood or aluminum rods and 4mm aluminium rods as a skeleton.

I recommend aluminum. With aluminum rods it is lighter and more resistant, but the final decision is up to you.

Easy to assemble and and all the parts are cut in such a way that they can be printed by an Ender 3 (20x20x30)

No supports are needed as it is sliced in half. (Making the Sclice as I normally do would require a lot of supports.) BUT this means that all parts have to be printed twice, otherwise you only get half the Bow.

I provide the full Bow not sliced and without holes, in case you want to slice in another way.

I usually print my parts with the following definitions:

Quality: 2.8

Walls: 3

Infill: 10% or 15%

Pattern: Zig Zag

If you liked the model, please click on like and rate. It is very important for me to know that they like my models. If you have any criticism, suggestion or doubt, do not hesitate to ask. :)

Luck on the Printing and happy cosplay! :D

The Rust - Genshin Impact