I was browsing youtube and saw people talking about buying magnetic mods for the Thrustmaster T300rs wheels, and got to looking, these are on ebay for $15-17 but ship from china, so it takes forever.

So, I designed this magnetic shifter mod piece. Addition items needed:

x2 Shifter Mod Plastic Housing (this STL)

x6 Neodymium disc magnets, 5/16" x 1/8". Suggest N38 or N42 grade. N52 grade would likely be very strong and undesirable. I suggest testing 1 magnet at a time to determine desired strength.

0.5mm - 1.0mm VHB tape or similar. Foam tape will likely not last.

The magnets are press fit, so I suggest using a vice or very stable and vertical pressing mechanism. I was able to press mine just with pliers as well.

WARNING: Neodymium magnets are strongly attracted to themselves. If they collide with excessive force they can crack or shatter, leaving behind dangerous shards of metal that can get stuck in skin, eyes, or swallowed by children or animals.

Good luck racing!

Edit: also make sure you remove the sticker behind where these mount, otherwise it won't stick well.

I (the creator) have the right to take legal action if this item is created and sold for profit without my consent.

3D printing settings

Printed in standard PETG settings (245-255C print temp), stand vertically on one edge.

Thrustmaster T300rs Magnet Shifter Mod(I believe it will wor

0.2mm layer, 2 walls, 15% infill