Urban Ninja Face Shield by Perihelion Prints

======

Can be worn on its own or as a cover for a disposable face mask. Suitable as a standalone accessory or to add flair to a masked cosplay outfit.

Scaled to fit most adult heads, but you may want to do a test print to confirm fit, and scale accordingly.

For attachment to your head, there are many options. If wearing on top of a disposable face mask, use its ear straps and fit them through the slots on the sides (if you've printed a version with slots). Alternatively, you can hot glue some ear or head straps on the sides.

Comes with a version with and without slots in the sides for the straps of a disposable face mask.

Designed in Blender. STLs included. Dimensions in millimetres.

Obviously this "face shield" is for aesthetics only, and does not provide meaningful protection from dust, pollution, or airborne pathogens.

======

"3D_female_free_content_part0" used in demo render (https://skfb.ly/pv9xE) by VITU6018 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"654230039_avatar_sdk" used in demo render (https://skfb.ly/oZCrV) by 654230039 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Angelica" used in demo render (https://skfb.ly/6ouNX) by DarkNik is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Gothic Girl" used in demo render (https://skfb.ly/oPEAI) by Toni García Vilche is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Kimono Girl" used in demo render (https://skfb.ly/p87OH) by Hellcutter is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Korean style female" used in demo render (https://skfb.ly/pu8so) by sxnneh is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

======

0.20mm layer height recommended.

Organic or "snug" supports recommended. You may want to adjust the orientation so it prints faster and requires less support. See slicer preview images for an ideal orientation.

PLA/PETG recommended.

Filament Usage (estimated): 55g

Printing Time (estimated): 3h

^ Estimates based off slicing for Prusa MK3.9. Your mileage may vary.