Xiphos' Moonlight is a 4 star sword, from Genshin Impact, that was used by Layla and Nilou in their demo chapters.

Alhaitham also used this sword on several occasions.

The sword around 1100 mm long and all the parts are cut in such a way that they can be printed by an Ender 3 (20x20x30)

Easy to assemble, it has 10.20mm holes to be able to place 10 mm aluminum rods as a skeleton.

You can use wood or other material, but I recommend aluminum. With aluminum rods it is lighter and more resistant, but the final decision is up to you.

I usually print my parts with the following definitions ( Because I'm a cosplayer and I prefer to give extra resistance so that the prop resists well to the amount of convention people. You can change the settings if you want. ) :

Quality: 2.8

Walls: 3

Infill: 10% or 15%

Pattern: Zig Zag

- Some parts may need some small supports.

-From my own experience, I give a margin of 0.20 mm for the rods (wood or aluminum.), so that the rod can be placed and glued without the risk of them getting stuck inside the piece.

I provide the full sword not sliced and without holes, in case you want to slice in another way.

If you liked the model, please click on like and rate. It is very important for me to know that they like my models. If you have any criticism, suggestion or doubt, do not hesitate to ask. :)

Luck on the Printing and happy cosplay! :D

Xiphos' Moonlight - Genshin Impact