*If you have any issues with printing or assembly, feel free to message me, and I'll do my best to assist you 😉.

https://linktr.ee/leoteapproach

/////ATTENTION

Make sure the bolts (bolt version) aren't too long. They shouldn't go past the frame's thickness to avoid damaging any internal

components.

/////THINGS TO ADD

FRONT CHAIN RISER

https://www.crealitycloud.com/model-detail/67bd6066e12c694d36620946?source=22

Depending on whether you're printing in PLA or ABS, use the STL files for the corners labelled PLA or ABS. All the parts are the same except for the corners. In the ABS version, the walls are 0.75mm wider due to material

shrinkage when cooling. This difference ensures there are no gaps between the pieces. However, if you encounter any fit issues, I've included STEP files so you can adjust the corners to better suit your printer.

*Approximately 235g of filament

/////BOM to print (alll versions - ABS or PLA):

1 x LID_RISER_K1C_BACK_VENT

1 x LID_RISER_K1C_BACK_WALL

1 x LID_RISER_K1C_BUMP_VENT

1 x LID_RISER_K1C_BUMP_WALL

4 x LID_RISER_K1C_HANDLE

2 x LID_RISER_K1C_NORMAL_VENT

2 x LID_RISER_K1C_NORMAL_WALL

/////CORNERS for ABS version

(without bolts)

1 x LID_RISER_K1C_BUMP_CORNER_ABS (without bolts)

3 x LID_RISER_K1C_CORNER_ABS

(with M3x55mm bolts)

LID_RISER_K1C_BUMP_CORNER_ABS_BOLT

LID_RISER_K1C_CORNER_ABS_BOLT

/////CORNERS for PLA version

(without bolts)

1 x LID_RISER_K1C_BUMP_CORNER_PLA

3 x LID_RISER_K1C_CORNER_PLA

(with M3x55mm bolts)

LID_RISER_K1C_BUMP_CORNER_PLA_BOLT

LID_RISER_K1C_CORNER_PLA_BOLT

/////ABS OPTION

I used the preset settings for ABS in OrcaSlicer to print.

The extruder and bed temperatures depend on the type of filament being used.

*I'd recommend preheating the chamber to at least 45oC before starting the print. Only activate the chamber fan after it reaches 50oC.

/////EXTERNAL WALLS

Outer brim only:

Brim width: 5 mm

Brim-object gap: 0 mm

Supports: only on the Back Wall, at the tube entrance

Seam position: Back

/////VENTS and HANDLES

Outer brim only:

Brim width: 1 mm

Brim-object gap: 1 mm

Supports: N.A.

Seam position: Back

/////CORNERS

Outer brim only:

Brim width: 5 mm

Brim-object gap: 0 mm

Supports: N.A.

Seam position: Back

/////BUMP WALL

Outer brim only:

Brim width: 5 mm

Brim-object gap: 0 mm

Supports: YES

Seam position: Back

CREALITY K1|K1C|K1SE - LID RISER V1

0.2mm layer, 3 walls, 15% infill