new try v2 for better feel

Design Concept

This fidget ball features a geometric lattice design for aesthetic appeal and tactile stimulation. The patterning provides an engaging texture, making it perfect for relieving stress.

Purpose

The model serves as a desk toy for casual use during work or study sessions, assisting in reducing anxiety and improving focus.

Printing Tips

It is recommended to use PLA material with a 0.1 to 0.2 mm layer height for enhanced detail. Supports are are required.

Assembly Instructions

No assembly required. Simply clean up any minor artifacts post-printing for optimal usabi🛠

Best Results & Troubleshooting Guide

The "Break-In" Period: When the print finishes, it will be stiff and feel solid. This is normal! Firmly squeeze and work the ball in your hands until you hear the internal joints "crack" loose. Once they break free, it will move smoothly.

Print Orientation: Always print the file upright. Printing on its side can cause structural issues and prevent the lattice from moving correctly.

Scale Matters: If you are having trouble with the movement, try scaling the model up. Larger prints tend to have better clearance for the moving parts.

Material Choice: This model is optimized for PLA. Using PETG or other flexible materials may affect the "snap" needed to loosen the joints.

Support Cleanup: Be thorough when removing supports from the internal lattice. Any leftover support material can block the movement.

Smooth Finish: If the bottom feels a bit rough after support removal, a quick sanding will make it feel much better in your hands.

fidget/stress ball

0.06mm layer, 4 walls, 15% infill

Best Quality Any Printer 0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill