Purpose

The primary purpose is to serve democracy on your desk and organize your pen, usb, sd card and battery holder. Each compartment is designed to keep certain items, like pens, markers, or small tools like the Jangklife drill, accessible and organized.
Arm are removable.

Printing Suggestions

Use PLA or PETG for durability.
Ensure supports are used for the limbs to maintain stability.
A layer height of 0.2mm is optimal for good detail balance and print speed.

Assembly Instructions

After printing the individual pieces, carefully assemble them in the correct slots and lock them in place. No additional glue or screws needed as the parts are fitted for easy assembly.

Further Information
The mech can be printed in one piece with the supports enabled.

On its back or upright, see on the 3mf files or gif.

However, I recommend cutting the parts with the connectors enabled to save filament.

Both models are already in the files.

YOU CAN MAKE YOUR OWN ARM

If you want to print another style of arm, I've left you an image with the dimensions for attaching it to the robots.

58x36xXX

The hole must be 3mm (16.5mm centerline) from the rear edge and 7mm (12mm centerline) from the top.

I would be grateful if you could contact me if you model arms. I would put the links in the description.

This is the v1, i will make some upgrade later.

Helldivers don’t die, they just respawn patriotically.

HD2 EXO-45 Patriot Exosuit pen sd card battery usb holder V1

0.2mm layer, 2 walls, 15% infill