Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 149.96x200mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm

The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm

Filaments Used: (* = Owned)

#000000 * PLA Creality Hyper Black Transmission Distance: 0

#7a7c7d * PLA Creality Hyper Grey Transmission Distance: 2.9

#e8e8e8 * PLA Giant Arm Matte Stone Gray Transmission Distance: 2.7

#ffffff * PLA Giant Arm Matte White Transmission Distance: 2

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #13 (1.12mm) swap to Hyper Grey

At layer #20 (1.68mm) swap to Matte Stone Gray

Border Only Colors from here until the end.

At layer #26 (2.16mm) swap to Matte White for the rest.

Tiled Printing Instructions:

Each Tile is it's own STL file (all saved in the STLs folder) with the correct Row and Column in the name.

The GridLayout.png shows each section and it's size in mm to help visualize.

It is important to note that in tiled images, some times will not have all of the color swaps and this is normal.

It might be possible to skip lower swaps if they will never be seen and use a Height Range Modifier to print

the lower portions faster. Your image and colors will determine this.

HUGEFORGE: Babe Ruth