🧱 Speaker Stand / Riser – Print & Assembly Instructions

Model: LG SPT8-SPK / LG S65TR soundbar

Printer: Creality K1

Purpose: Raise speaker above obstructions (sofa, furniture, etc.) to align sound at ear level.

⸻

🔧 Materials & Temperatures

Component Material Nozzle Temp Bed Temp Cooling Notes

Main Stand PLA 230 °C 55 °C 100 % after layer 2 Easy to print, good surface finish

(Optional) Main Stand PETG 245 °C 80 °C 40–50 % Higher heat and impact resistance

Feet TPU 235 °C 55 °C 50 % Flexible, vibration-absorbing

⸻

⚙️ Print Settings

• Layer Height: 0.2 mm

• Walls: 3

• Top Layers: 4

• Bottom Layers: 4

• Infill Type: Grid

• Infill Density: 15 %

• Seam Alignment: Rear or Random

• Brim: 4–6 mm (recommended for PETG)

• Z-hop: 0.2 mm enabled

• Ironing: Optional for smooth top surface

⸻

🧭 Orientation

• Print rear down on the bed.

• No supports required unless overhangs > 60°.

• Tested on bed size: 220 × 215 mm (K1 with CFS kit).

⸻

• Optional: place thin foam pad between screw head and speaker base to prevent marks.

⸻

🦶 TPU Feet

• Print 4 pcs (100 % infill).

• Clean riser bottom surface with isopropyl alcohol.

• Fix each foot with thin double-sided adhesive tape.

• Press firmly for a few seconds for good bond.

⸻

🔩 Speaker Mount Fixture

• Screw: 1 × M4 × 16 mm PH2 pan head (DIN 7985)

• Hole: 4.2 mm pilot hole in riser (top center) — no heat insert.

• Assembly Steps:

1. Align the speaker’s bottom mount with the riser’s center hole.

2. Insert the M4 screw through the riser into the speaker’s threaded insert or socket.

3. Tighten gently until snug — do not overtighten, to avoid stripping plastic threads.

⸻

✅ Final Tips

• Let part cool before removal to avoid warping.

• For PETG, flex the plate slightly to release.

• Ensure speaker is stable and cables have clearance.

• Optional: add a small TPU or felt washer under the screw head to reduce vibration noise.

LG SPT8-SPK stand / riser

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill