Scraper Grip by Bambu Lab

"Prolonging the lifetime of the build plate is to use a sharp scraper for releasing the model from the printing surface. After the plate has cooled down, gently slide the scraper underneath one of the corners of the model, then carefully bend the sheet to remove the model."

I couldn't find a good scrapper for my K1C, so I decided to borrow one from BL. There's an unbranded version, and that's what I've uploaded here.

Here's the original file:

https://**********.com/en/models/12702-*****-scraper-grip#profileId-12703

Blades can be bought here:

https://us.store.*****lab.com/products/*****-scraper-3-pcs

Assembly video here:

https://www.youtube.com/watch?v=mUSoCr1y9Jk&t=7s

I printed with ABS on the K1C (because I wanted to see if I could), and it came out pretty decent.

Creality Cloud prompted me to enable supports, which, for the holder, isn't bad to remove. However, if you can not add them (turn them off) to the little triangle thing, that would be good because the supports cover up the screw holes and I had to use a vice drill to remove the supports.

The little plastic piece goes under the blade and not on top of it. You will need to push on the little plastic piece to keep it in place. You may want to screw the bolts/screws in first to ensure they catch.

I believe the screw size is M3x8 (I'll confirm and update).

Scraper Grip

0.2mm layer, 2 walls, 15% infill