Design Concept & Purpose

This design features a simple yet effective **Speaker Mount** tailored specifically for wire shelves and wire racks. The primary purpose of this model is to securely attach devices, such as your Echo speaker, to the wire grid, allowing for optimal speaker placement and enhancing audio performance through stability and a degree of vibration dampening.

Components & Specification

This mount consists of three main parts:

1.Bolt (The long threaded part)

2.Base Plate (The flat square part)

3.Threaded Nut/Spacer (The round part with internal threads)

The bolt is designed to fit the common mounting standard found on many speakers and mounting accessories:

Bolt Size:1/4-20 UNC (One-quarter inch diameter with 20 threads per inch, a coarse Unified National thread).

Print Recommendations

To ensure the durability and function of the mount:

Filament: Use a strong filament like ABS or PETG to ensure high durability and resistance to wear.

Infill Density: Consider an infill density of at least 50% for maximum strength and load-bearing capacity.

Recommended Print Quantity: We recommend printing two (2) of the spacer.obj parts to improve stability.

Assembly Instructions

1. Align: Place the Base Plate (square part) on the wire shelf where you want to mount the speaker.

2. Insert Bolt: Insert the Bolt through the hole in the Base Plate and the wire grid of the shelf.

3. Secure: From underneath the shelf, screw the Threaded Nut/Spacer (round part) onto the Bolt until the entire assembly is tightly secured to the shelf. (If using two spacers, place one above and one below the wire grid to sandwich it).

4. Attach Speaker: Connect your speaker or device to the exposed end of the Bolt.

💡 Note: Since the rendered image uses a Phillips head bolt, you will need to prepare a Phillips screwdriver to tighten the assembly securely.

⚠️ IMPORTANT NOTICE / DISCLAIMER

Please read the following carefully before use:

Required Tool:

A Phillips screwdriver is required for final assembly to ensure the bolt is adequately secured.

Disclaimer:

The user assumes all risk and liability for the use of this 3D-printed mount. We do not guarantee or warrant the load-bearing capacity or durability of the printed parts, as these factors depend entirely on the material, printer settings, and print quality used by the end-user. The designer and provider will not be held liable for any damage, loss, injury, or other direct or indirect damages whatsoever arising from the use or misuse of this mounting solution. Use at your own risk.

Speaker Mount for Wire Shelf