The best 3d printable speedcube!

The Velocity X1 is a high-performance 3D-printable speedcube designed to outperform traditional flagship cubes. Featuring lightweight internals, advanced anti-pop technology, customizable magnets, and exceptional corner cutting, it delivers ultra-smooth, fast, and controllable turning for competitive solving. Engineered specifically for 3D printing, every part is modular, customizable, and optimized for both performance and durability.

Velocity X1 — Print the future of speedcubing.

Assembly instructions:

Parts list:



Center x6

Edge x12

Corner x8

Center Cap x1 (times six colors)

Edge Cap x4 (times 6 colors)

Corner Cap x4 (times 6 colors)

Core x1

Hardware needed:

m3x20 screw x6

9mm spring x6

First screw the centers in only a few turns. Don’t gorget to include the springs.



Next add the first four edge pieces at the bottom. I recommend waiting till after the cube is assembled to put the color caps on.



Next add the four corners at the bottom.



From here you will put in the four middle edges.



Lastly, put in all the top pieces except for one edge, which will be the hardest piece to install.



Turn the top layer 45 degrees, to make it easier to install the last piece. Hold the two front corners apart, and gently force the last piece in.



After this the cube is assembled, but it will be very loose. Tighten all screws to your taste. Lastly you can put the color caps on. Start with the white center cap. Put the yellow center cap on the opposite side of the white one. Next you can put red on any one of the centers available. The blue will go to the left of the red, if the white is on the bottom. Orange goes to the left of blue, and green goes on the last available side. You can now put the rest of the color caps in their respective places.



Don’t hesitate to comment if you have any questions.

If you enjoy my work, please boost!

Velocity X1 - 3d Printed Speedcube